Skip to content

Alternator🔗

There are two alternator modules:

  • Alternator - This module checks to see if the engine has been running long enough to enable the alternator (Alternator Delay Time). If so, it gives the OK to run the alternator (Alternator Requested = TRUE).

  • Alternator Demand - This module configures the alternator actuator source and source frequency. It also controls the duty cycle of the alternator actuator, which would normally be either on 100% (on) or 0% (off). But, Alternator Actuator Duty Cycle can be used to specify a lower maximum value.