Skip to content

Introduction🔗

Thank you for purchasing the MPVI3.

This is our most recent interface device designed specifically for tuners. When used with the VCM Suite of applications, the MPVI3 provides the most inclusive scanning, logging, and calibration package in the industry.

Using the MPVI3 with our TDN app for mobile devices, vehicle owners can read and scan their vehicles and then exchange the necessary tuning files with their selected tuner, whether the tuner is nearby or on the other side of the world.

Safety Information🔗

At HP Tuners, safety is our top priority. We are dedicated to ensuring that each MPVI has been tested for safety and reliability. Our team works diligently to design and manufacture MPVI's that adhere to stringent safety protocols. We employ rigorous quality control measures at every stage of production, from firmware, software, design, and testing, to support that our MPVI's perform flawlessly and safely.

Additionally, we stay up-to-date with the latest industry safety regulations and standards to ensure that our products consistently meet or exceed all relevant requirements.

Limited Warranty🔗

HP Tuners warrants to the original purchaser of an HP Tuners MPVI3 that the product will be free from defects in materials or workmanship in the manufacturing process for a period of twelve months from the date of registration. The twelve month limited warranty will apply to any MPVI3 purchased and registered through HP Tuners. During the applicable warranty period, we will, repair or replace (in our sole discretion) any MPVI3 found by HP Tuners (in our sole discretion) to contain defective materials or workmanship, at no cost to you.

To file a warranty claim you must submit a ticket to our support team through the HP Tuners website or by emailing Support@hptuners.com. When submitting a warranty claim we will need the MPVI3 serial number, which can be found on the back of the MPVI.

This limited warranty will not apply to any problems with a MPVI3, in HP Tuners’ determination, is a result of conditions, malfunctions or damage unrelated to defects in material or workmanship in the manufacturing process, including failure to comply with HP Tuners’ Compliance Statement. This limited warranty is not transferable and does not apply to any MPVI3 not properly installed or properly used by the purchaser. The above warranty is the full extent of the warranty available for the MPVI3. HP Tuners specifically disclaims all other warranties, express or implied, including all warranties of fitness for a particular purpose or warranties of merchantability.

Limitation of Liability🔗

IN NO EVENT WILL HP TUNERS, ITS AFFILIATES, SUPPLIERS, LICENSORS, EMPLOYEES, OR AGENTS BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, PUNITIVE, ACTUAL, CONSEQUENTIAL, GENERAL, SPECIAL, EXEMPLARY, OR OTHER DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, THOSE RESULTING FROM LOST PROFITS, LOST DATA OR BUSINESS INTERRUPTION) ARISING OUT OF THE USE OF A MPVI3 PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT OR ANY OTHER LEGAL THEORY AND WHETHER OR NOT HP TUNERS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

FCC Statement For Users🔗

This device complies with Part 15 of the FCC Rules when operating with the embedded antenna. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and

  2. This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  3. Reorient or relocate the receiving antenna.

  4. Increase the separation between the equipment and the receiver.
  5. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  6. Consult the dealer or an experienced technician for help.

Any changes or modifications not expressly approved by HP Tuners could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement🔗

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter meets the Mobile requirements at a distance of 20 cm and above from the human body, in accordance to the limit(s) exposed in the RF Exposure Analysis. This transmitter also meets the Portable requirements. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.

CAN ICES/NMB🔗

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Product Environmental Disclosure🔗

The part(s)/product(s) in this declaration do not contain any of the substances above the maximum concentration values identified in the RoHS. This statement is based on information provided by our suppliers and our own internal knowledge of the materials used in our products. We are committed to ongoing efforts to ensure continued compliance with RoHS regulations. This statement is provided in good faith and without warranty of any kind.

To ensure compliance with WEEE and RoHS, HP Tuners engages in a take-back program in which customers may send products to the address below for proper disposal and recycling:

ATTN: Electronic Waste Disposal

700 Eastwood Lane, Buffalo Grove, IL 60089 United State of America