Skip to content

Engine State🔗

Indicates the current engine state. There are four possible values for this:

  • Stalled - the engine speed is lower than it would be if the starter was rotating the engine.
  • Cranking - the engine speed is within the range that it would normally be when the starter motor has begun rotating the engine, but the engine has not yet started to rotate under its own power.
  • Ramping - this is a momentary transitional state between cranking and running. The engine has likely started to run under its own power, but isn't yet up to the speed necessary to be considered running.
  • Running - the engine is running under its own power.

Note

State is determined by current engine speed, based on the thresholds set with Engine Cranking Threshold, Engine Ramping Threshold and Engine Running Threshold.