Acceleration Pedal 2 Position 1 Fitted

Set to YES to indicate acceleration pedal position 2 is installed in the vehicle. Set to NO to indicate that it is not fitted.

The ECU will support the installation of either 1 or 2 acceleration pedal position sensors. If a single sensor is fitted, it may be configured as either sensor 1 or sensor 2 and the final acceleration pedal position sensor value will come directly from the fitted sensor. If both sensors are fitted (and neither sensor is in error mode), the lower value of the two will be selected.

If no sensors are fitted, or if all fitted sensors are in error mode, the ECU will go into "acceleration pedal limp" mode, which sets the pedal position to 0.

Note

Cannot be live tuned. Requires flashing modifications back to the ECU.